# Makefile.in generated by automake 1.11.3 from Makefile.am.
# src/lib/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



###################################
# Copyright 2010 Szymon Jakubczak
#
# RawOFDM

# -*- Makefile -*-
#
# Copyright 2009 Free Software Foundation, Inc.
# 
# This file is part of GNU Radio
# 
# GNU Radio is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.
# 
# GNU Radio is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with GNU Radio; see the file COPYING.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street,
# Boston, MA 02110-1301, USA.
# 

# -*- Makefile -*-
#
# Copyright 2009 Free Software Foundation, Inc.
# 
# This file is part of GNU Radio
# 
# GNU Radio is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.
# 
# GNU Radio is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with GNU Radio; see the file COPYING.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street,
# Boston, MA 02110-1301, USA.
# 

# Makefile.swig.gen for raw.i



pkgdatadir = $(datadir)/raw-ofdm
pkgincludedir = $(includedir)/raw-ofdm
pkglibdir = $(libdir)/raw-ofdm
pkglibexecdir = $(libexecdir)/raw-ofdm
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
DIST_COMMON = $(am__raw_python_PYTHON_DIST) \
	$(am__raw_swiginclude_HEADERS_DIST) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/Makefile.swig.gen \
	$(top_srcdir)/Makefile.common $(top_srcdir)/Makefile.swig
am__append_1 = $(DEPDIR)/raw-generate-*
am__append_2 = $(DEPDIR)/*.S*
subdir = src/lib
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/config/cppunit.m4 \
	$(top_srcdir)/config/gr_git.m4 \
	$(top_srcdir)/config/gr_gprof.m4 \
	$(top_srcdir)/config/gr_lib64.m4 \
	$(top_srcdir)/config/gr_no_undefined.m4 \
	$(top_srcdir)/config/gr_pwin32.m4 \
	$(top_srcdir)/config/gr_python.m4 \
	$(top_srcdir)/config/gr_scripting.m4 \
	$(top_srcdir)/config/gr_swig.m4 \
	$(top_srcdir)/config/gr_version.m4 \
	$(top_srcdir)/config/lf_cc.m4 $(top_srcdir)/config/lf_cxx.m4 \
	$(top_srcdir)/config/lf_warnings.m4 \
	$(top_srcdir)/config/pkg.m4 \
	$(top_srcdir)/config/gr_standalone.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(raw_pylibdir)" \
	"$(DESTDIR)$(raw_pythondir)" "$(DESTDIR)$(raw_swigincludedir)"
LTLIBRARIES = $(lib_LTLIBRARIES) $(raw_pylib_LTLIBRARIES)
am__DEPENDENCIES_1 =
_raw_swig_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
	$(raw_la_swig_libadd)
am___raw_swig_la_SOURCES_DIST = raw_swig.cc
am__raw_swig_la_OBJECTS = _raw_swig_la-raw_swig.lo
_raw_swig_la_OBJECTS = $(am__raw_swig_la_OBJECTS)
_raw_swig_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(_raw_swig_la_CXXFLAGS) \
	$(CXXFLAGS) $(_raw_swig_la_LDFLAGS) $(LDFLAGS) -o $@
am__raw_swig_la_rpath = -rpath $(raw_pylibdir)
libgnuradio_raw_la_DEPENDENCIES = ofdm/libraw-ofdm.la \
	qam/libraw-qam.la util/libraw-util.la spiral/libspiral.la \
	rscode/librscode.la
am_libgnuradio_raw_la_OBJECTS =
libgnuradio_raw_la_OBJECTS = $(am_libgnuradio_raw_la_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(_raw_swig_la_SOURCES) $(libgnuradio_raw_la_SOURCES)
DIST_SOURCES = $(am___raw_swig_la_SOURCES_DIST) \
	$(libgnuradio_raw_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__raw_python_PYTHON_DIST = raw_swig.py
am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
py_compile = $(top_srcdir)/py-compile
am__raw_swiginclude_HEADERS_DIST = raw.i ofdm/raw_ofdm.i qam/raw_qam.i \
	util/raw_util.i
HEADERS = $(raw_swiginclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /home/saru015/gr/rawofdm/missing --run aclocal-1.11
AMTAR = $${TAR-tar}
AR = ar
AS = as
AUTOCONF = ${SHELL} /home/saru015/gr/rawofdm/missing --run autoconf
AUTOHEADER = ${SHELL} /home/saru015/gr/rawofdm/missing --run autoheader
AUTOMAKE = ${SHELL} /home/saru015/gr/rawofdm/missing --run automake-1.11
AWK = mawk
CC = gcc
CCAS = gcc
CCASDEPMODE = depmode=gcc3
CCASFLAGS = -march=native -mtune=native -O3 -pipe
CCDEPMODE = depmode=gcc3
CFLAGS = -march=native -mtune=native -O3 -pipe
CPP = gcc -E
CPPFLAGS = 
CPPUNIT_CFLAGS =  
CPPUNIT_CONFIG = 
CPPUNIT_CPPFLAGS = 
CPPUNIT_INCLUDEDIR = /usr/include
CPPUNIT_LIBS = -lcppunit -ldl  
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -march=native -mtune=native -O3 -pipe
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DOCVER = 3.3.0
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GIT = /usr/bin/git
GIT_COMMIT = 
GIT_DESCRIBE = 
GIT_SEQNO = 
GIT_TAG = 
GNURADIO_CORE_CFLAGS = -I/usr/local/include/gnuradio -I/usr/local/include  
GNURADIO_CORE_CPPFLAGS =  -I/usr/local/include/gnuradio -I/usr/local/include
GNURADIO_CORE_INCLUDEDIR = /usr/local/include/gnuradio
GNURADIO_CORE_LIBS = -L/usr/local/lib -lgnuradio-core -lgruel -lfftw3f -lm  
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS = 
LIBOBJS = 
LIBS =  -L/usr/local/lib -lgnuradio-core -lgnuradio-digital -lgruel -lfftw3f -lm  
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBVER = 3.3.0
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/saru015/gr/rawofdm/missing --run makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT = 
NO_UNDEFINED = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = raw-ofdm
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_URL = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PYTHON = /usr/bin/python
PYTHON_CPPFLAGS = -I/usr/include/python2.7
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_LDFLAGS = 
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.7
RANLIB = ranlib
RELEASE = 3.3.0
RM_PROG = /bin/rm
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/bash
STRIP = strip
SWIG = /usr/bin/swig -c++
SWIG_PYTHON_CPPFLAGS = -I/usr/include/python2.7
SWIG_PYTHON_LIB = -lswigpy
SWIG_PYTHON_OPT = -python
VERSION = 3.3.0
XMLTO = 
abs_builddir = /home/saru015/gr/rawofdm/src/lib
abs_srcdir = /home/saru015/gr/rawofdm/src/lib
abs_top_builddir = /home/saru015/gr/rawofdm
abs_top_srcdir = /home/saru015/gr/rawofdm
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
autoconf_default_CXXFLAGS = 
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir}
exec_prefix = ${prefix}
gr_libdir_suffix = 64
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/saru015/gr/rawofdm/install-sh
lf_CFLAGS =  -Wall -Werror-implicit-function-declaration
lf_CXXFLAGS =  -Wall -Woverloaded-virtual
libdir = ${exec_prefix}/lib64
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/raw-ofdm
pkgpythondir = ${pythondir}/raw-ofdm
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python2.7/dist-packages
pythondir = ${prefix}/lib/python2.7/dist-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
swig_CXXFLAGS = 
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..

# -*- Makefile -*-
# The name of this "out-of-tree" module
modname = raw

# these flags are used when compiling non-SWIG-wrapper files
# when going in to non-SWIG libraries
AM_CXXFLAGS = 

# Sets ABI version in SONAME and appends -LIBVER to filename
LTVERSIONFLAGS = -version-info 0:0:0 -release $(LIBVER)

# these flags are used when compiling any CXX file
AM_CPPFLAGS = \
    $(STD_DEFINES_AND_INCLUDES) \
    $(PYTHON_CPPFLAGS) \
    $(CPPUNIT_INCLUDES) \
    $(GNURADIO_CORE_CPPFLAGS)


# these are used by both SWIG and CXX
STD_DEFINES_AND_INCLUDES = \
    $(DEFINES) \
    -I$(abs_top_srcdir)/src/lib/spiral \
    -I$(abs_top_srcdir)/src/lib/rscode \
    -I$(abs_top_srcdir)/src/lib/ofdm \
    -I$(abs_top_srcdir)/src/lib/qam \
    -I$(abs_top_srcdir)/src/lib/util \
    -I$(GNURADIO_CORE_INCLUDEDIR) \
    -I$(GNURADIO_CORE_INCLUDEDIR)/swig \
    -I/usr/local/include/gruel/swig


# includes
modincludedir = $(includedir)/$(modname)

# swig includes 
swigincludedir = $(modincludedir)/swig

# Install this stuff in the appropriate subdirectory
# This usually ends up at:
#   ${prefix}/lib/python${python_version}/site-packages/$(modname)
modpythondir = $(pythondir)/$(modname)
modpyexecdir = $(pyexecdir)/$(modname)

# Data directory for grc block wrappers
grc_blocksdir = $(prefix)/share/gnuradio/grc/blocks

# Don't assume that make predefines $(RM), because BSD make does
# not. We define it now in configure.ac using AM_PATH_PROG, but now
# here have to add a -f to be like GNU make.
RM = $(RM_PROG) -f

# Other common defines; use "+=" to add to these
STAMPS = $(am__append_1)
MOSTLYCLEANFILES = $(BUILT_SOURCES) $(STAMPS) *.pyc *.pyo *~ *.tmp \
	*.loT $(am__append_2)
SUBDIRS = ofdm qam rscode spiral util
DIST_SUBDIRS = $(SUBDIRS)
lib_LTLIBRARIES = libgnuradio-raw.la
libgnuradio_raw_la_SOURCES = 
libgnuradio_raw_la_LIBADD = \
        ofdm/libraw-ofdm.la \
        qam/libraw-qam.la \
        util/libraw-util.la \
        spiral/libspiral.la \
        rscode/librscode.la


###################################
# SWIG Python interface and library
TOP_SWIG_IFILES = \
        raw.i

raw_la_swig_libadd = \
        libgnuradio-raw.la

SWIG_PYTHON_FLAGS = \
	-fvirtual	\
	-python		\
	-modern		\
	-keyword	\
	-w511		\
	-outdir .

STD_SWIG_PYTHON_ARGS = \
	$(SWIG_PYTHON_FLAGS)			\
	$(STD_DEFINES_AND_INCLUDES)		\
	$(WITH_SWIG_INCLUDES)			\
	$(WITH_INCLUDES)

STD_SWIG_LA_LD_FLAGS = \
	$(PYTHON_LDFLAGS)	\
	-module			\
	-avoid-version		\
	$(NO_UNDEFINED)

STD_SWIG_LA_LIB_ADD = \
	-lstdc++

STD_SWIG_CXX_FLAGS = 
SUFFIXES = .i
swig_built_sources = raw_swig.py raw_swig.cc
raw_pythondir = $(pythondir)/raw
raw_pylibdir = $(pyexecdir)/raw
raw_swigincludedir = $(swigincludedir)
raw_swiginclude_HEADERS = \
	raw.i			\
	$(raw_swiginclude_headers)

raw_pylib_LTLIBRARIES = \
	_raw_swig.la

_raw_swig_la_SOURCES = \
	raw_swig.cc			\
	$(raw_la_swig_sources)

_raw_swig_la_LIBADD = \
	$(STD_SWIG_LA_LIB_ADD)		\
	$(raw_la_swig_libadd)

_raw_swig_la_LDFLAGS = \
	$(STD_SWIG_LA_LD_FLAGS)		\
	$(raw_la_swig_ldflags)

_raw_swig_la_CXXFLAGS = \
	$(STD_SWIG_CXX_FLAGS)		\
	$(raw_la_swig_cxxflags)

raw_python_PYTHON = \
	raw_swig.py			\
	$(raw_python)


# add some of the variables generated inside the Makefile.swig.gen
BUILT_SOURCES = $(swig_built_sources)

# Do not distribute the output of SWIG
no_dist_files = $(swig_built_sources)

# additional SWIG files to be installed
# FIXME: they are installed in swig/ without subdirectories!
raw_swiginclude_headers = \
        ofdm/raw_ofdm.i \
        qam/raw_qam.i \
        util/raw_util.i

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .i .cc .lo .o .obj
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Makefile.common $(top_srcdir)/Makefile.swig $(srcdir)/Makefile.swig.gen $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lib/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu src/lib/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/Makefile.common $(top_srcdir)/Makefile.swig $(srcdir)/Makefile.swig.gen:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
	}

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
install-raw_pylibLTLIBRARIES: $(raw_pylib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(raw_pylibdir)" || $(MKDIR_P) "$(DESTDIR)$(raw_pylibdir)"
	@list='$(raw_pylib_LTLIBRARIES)'; test -n "$(raw_pylibdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(raw_pylibdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(raw_pylibdir)"; \
	}

uninstall-raw_pylibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(raw_pylib_LTLIBRARIES)'; test -n "$(raw_pylibdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(raw_pylibdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(raw_pylibdir)/$$f"; \
	done

clean-raw_pylibLTLIBRARIES:
	-test -z "$(raw_pylib_LTLIBRARIES)" || rm -f $(raw_pylib_LTLIBRARIES)
	@list='$(raw_pylib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
_raw_swig.la: $(_raw_swig_la_OBJECTS) $(_raw_swig_la_DEPENDENCIES) $(EXTRA__raw_swig_la_DEPENDENCIES) 
	$(_raw_swig_la_LINK) $(am__raw_swig_la_rpath) $(_raw_swig_la_OBJECTS) $(_raw_swig_la_LIBADD) $(LIBS)
libgnuradio-raw.la: $(libgnuradio_raw_la_OBJECTS) $(libgnuradio_raw_la_DEPENDENCIES) $(EXTRA_libgnuradio_raw_la_DEPENDENCIES) 
	$(LINK) -rpath $(libdir) $(libgnuradio_raw_la_OBJECTS) $(libgnuradio_raw_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/_raw_swig_la-raw_swig.Plo

.cc.o:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(LTCXXCOMPILE) -c -o $@ $<

_raw_swig_la-raw_swig.lo: raw_swig.cc
	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(_raw_swig_la_CXXFLAGS) $(CXXFLAGS) -MT _raw_swig_la-raw_swig.lo -MD -MP -MF $(DEPDIR)/_raw_swig_la-raw_swig.Tpo -c -o _raw_swig_la-raw_swig.lo `test -f 'raw_swig.cc' || echo '$(srcdir)/'`raw_swig.cc
	$(am__mv) $(DEPDIR)/_raw_swig_la-raw_swig.Tpo $(DEPDIR)/_raw_swig_la-raw_swig.Plo
#	source='raw_swig.cc' object='_raw_swig_la-raw_swig.lo' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(_raw_swig_la_CXXFLAGS) $(CXXFLAGS) -c -o _raw_swig_la-raw_swig.lo `test -f 'raw_swig.cc' || echo '$(srcdir)/'`raw_swig.cc

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-raw_pythonPYTHON: $(raw_python_PYTHON)
	@$(NORMAL_INSTALL)
	test -z "$(raw_pythondir)" || $(MKDIR_P) "$(DESTDIR)$(raw_pythondir)"
	@list='$(raw_python_PYTHON)'; dlist=; list2=; test -n "$(raw_pythondir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
	  if test -f $$b$$p; then \
	    $(am__strip_dir) \
	    dlist="$$dlist $$f"; \
	    list2="$$list2 $$b$$p"; \
	  else :; fi; \
	done; \
	for file in $$list2; do echo $$file; done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(raw_pythondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(raw_pythondir)" || exit $$?; \
	done || exit $$?; \
	if test -n "$$dlist"; then \
	  $(am__py_compile) --destdir "$(DESTDIR)" \
	                    --basedir "$(raw_pythondir)" $$dlist; \
	else :; fi

uninstall-raw_pythonPYTHON:
	@$(NORMAL_UNINSTALL)
	@list='$(raw_python_PYTHON)'; test -n "$(raw_pythondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	dir='$(DESTDIR)$(raw_pythondir)'; \
	filesc=`echo "$$files" | sed 's|$$|c|'`; \
	fileso=`echo "$$files" | sed 's|$$|o|'`; \
	st=0; \
	for files in "$$files" "$$filesc" "$$fileso"; do \
	  $(am__uninstall_files_from_dir) || st=$$?; \
	done; \
	exit $$st
install-raw_swigincludeHEADERS: $(raw_swiginclude_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(raw_swigincludedir)" || $(MKDIR_P) "$(DESTDIR)$(raw_swigincludedir)"
	@list='$(raw_swiginclude_HEADERS)'; test -n "$(raw_swigincludedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(raw_swigincludedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(raw_swigincludedir)" || exit $$?; \
	done

uninstall-raw_swigincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(raw_swiginclude_HEADERS)'; test -n "$(raw_swigincludedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(raw_swigincludedir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(raw_pylibdir)" "$(DESTDIR)$(raw_pythondir)" "$(DESTDIR)$(raw_swigincludedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
	clean-raw_pylibLTLIBRARIES mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-raw_pylibLTLIBRARIES install-raw_pythonPYTHON \
	install-raw_swigincludeHEADERS

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-libLTLIBRARIES

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-libLTLIBRARIES uninstall-raw_pylibLTLIBRARIES \
	uninstall-raw_pythonPYTHON uninstall-raw_swigincludeHEADERS

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	ctags-recursive install install-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic \
	clean-libLTLIBRARIES clean-libtool clean-raw_pylibLTLIBRARIES \
	ctags ctags-recursive dist-hook distclean distclean-compile \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-libLTLIBRARIES \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-raw_pylibLTLIBRARIES \
	install-raw_pythonPYTHON install-raw_swigincludeHEADERS \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-libLTLIBRARIES \
	uninstall-raw_pylibLTLIBRARIES uninstall-raw_pythonPYTHON \
	uninstall-raw_swigincludeHEADERS


# Don't distribute the files defined in the variable 'no_dist_files'
dist-hook:
	@for file in $(no_dist_files); do \
		echo $(RM) $(distdir)/$$file; \
		$(RM) $(distdir)/$$file; \
	done;

generate-makefile-swig $(srcdir)/Makefile.swig.gen: $(top_srcdir)/Makefile.swig.gen.t
	@do_recreate=0; \
	if test -f $(srcdir)/Makefile.swig.gen; then \
		if $(RM) $(srcdir)/Makefile.swig.gen 2>/dev/null; then \
			if touch $(srcdir)/Makefile.swig.gen 2>/dev/null; then \
				do_recreate=1; \
			fi; \
		fi; \
	else \
		if touch $(srcdir)/Makefile.swig.gen 2>/dev/null; then \
			do_recreate=1; \
		fi; \
	fi; \
	if test "$$do_recreate" == "1"; then \
		echo "Regenerating $(srcdir)/Makefile.swig.gen"; \
		for TFILE in $(TOP_SWIG_IFILES); do \
			TNAME=`python -c "import os.path as op; (dN, fN) = op.split ('$$TFILE'); (fbN, fE) = op.splitext (fN); print fbN;"`; \
			$(SED) -e 's|@NAME@|'$$TNAME'|g;' < $(top_srcdir)/Makefile.swig.gen.t >> $(srcdir)/Makefile.swig.gen; \
			echo "" >> $(srcdir)/Makefile.swig.gen; \
		done; \
	else \
		echo "Cannot recreate $(srcdir)/Makefile.swig.gen because the directory or file is write-protected."; \
		exit -1; \
	fi;

raw.h raw_swig.py raw_swig.cc: raw.i
	trap 'rm -rf $(DEPDIR)/raw-generate-*' 1 2 13 15; \
	if mkdir $(DEPDIR)/raw-generate-lock 2>/dev/null; then \
		rm -f $(DEPDIR)/raw-generate-stamp; \
		$(MAKE) $(AM_MAKEFLAGS) $(DEPDIR)/raw-generate-stamp WHAT=$<; \
		rmdir $(DEPDIR)/raw-generate-lock; \
	else \
		while test -d $(DEPDIR)/raw-generate-lock; do \
			sleep 1; \
		done; \
		test -f $(DEPDIR)/raw-generate-stamp; \
		exit $$?; \
	fi;

$(DEPDIR)/raw-generate-stamp:
	if $(SWIG) $(STD_SWIG_PYTHON_ARGS) $(raw_swig_args) \
		-MD -MF $(DEPDIR)/raw.Std \
		-module raw_swig -o raw_swig.cc $(WHAT); then \
	    if test $(host_os) = mingw32; then \
		$(RM) $(DEPDIR)/raw.Sd; \
		$(SED) 's,\\\\,/,g' < $(DEPDIR)/raw.Std \
			> $(DEPDIR)/raw.Sd; \
		$(RM) $(DEPDIR)/raw.Std; \
		$(MV) $(DEPDIR)/raw.Sd $(DEPDIR)/raw.Std; \
	    fi; \
	else \
	    $(RM) $(DEPDIR)/raw.S*; exit 1; \
	fi;
	$(RM) $(DEPDIR)/raw.d
	cp $(DEPDIR)/raw.Std $(DEPDIR)/raw.d
	echo "" >> $(DEPDIR)/raw.d
	$(SED) -e '1d;s, \\,,g;s, ,,g' < $(DEPDIR)/raw.Std | \
		awk '{ printf "%s:\n\n", $$0 }' >> $(DEPDIR)/raw.d
	$(RM) $(DEPDIR)/raw.Std
	touch $(DEPDIR)/raw-generate-stamp

# KLUDGE: Force runtime include of a SWIG dependency file.  This is
# not guaranteed to be portable, but will probably work.  If it works,
# we have accurate dependencies for our swig stuff, which is good.

include ./$(DEPDIR)/raw.d

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
